SOHC.co.uk Forums > Project Board
Doms CB550F1 project
DomP:
Thanks all, I've got the rocker off following several guides, I'm labelling everything and sticking bolts through labelled card to remember their positions for reassembly. I'll post some photos later
Trigger:
--- Quote from: DomP on September 02, 2023, 06:17:39 PM ---Thanks all, I've got the rocker off following several guides, I'm labelling everything and sticking bolts through labelled card to remember their positions for reassembly. I'll post some photos later
--- End quote ---
I love pictures of the insides of engines. That is what made my job so interesting, you would never find the same problem once stripped down ;)
DomP:
For now in going to call it a day, the head won't come off the barrels and it's beer o'clock
McCabe-Thiele (Ted):
My 400 head was well stuck on Iirc I sprayed all around the edges of the head gasket with Plus Gas then used a big Rubber mallet to give it some side shock. Lastly I used a plastic double glazing wedge to persuade it to separate.
DomP:
Here's what I've found so far... the rockers are nice and clean but there is some scoring to the surfaces in the head and on the camshaft, some is visible but can't be felt with a nail.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version