SOHC.co.uk Forums > Project Board
Doms CB550F1 project
Bryanj:
Recently i have had a lot of my old barrels not clean at 0.25 as the liners have been egg shaped, so worth checking bore before ordering pistons.
You can call me on 07795162623 Monday to Thursday inclusive after 8pm when i am at work driving
Oddjob:
Remove the pinch bolt on the kickstarter and force a screwdriver or a chisel into the slot, that should expand the slot and allow the arm to come off.
DomP:
--- Quote from: Oddjob on September 03, 2023, 03:22:50 PM ---Remove the pinch bolt on the kickstarter and force a screwdriver or a chisel into the slot, that should expand the slot and allow the arm to come off.
--- End quote ---
I tried that Ken, I'll be a bit more gung-ho!
Trigger:
--- Quote from: Bryanj on September 03, 2023, 03:11:03 PM ---Recently i have had a lot of my old barrels not clean at 0.25 as the liners have been egg shaped, so worth checking bore before ordering pistons.
You can call me on 07795162623 Monday to Thursday inclusive after 8pm when i am at work driving
--- End quote ---
It is one of the mistakes that a lot of owners buy pistons at .25 and only 10% ever do clean up mate.
Bryanj:
Yup, im finding them barrell shaped, fine at top and bottom but dont touch in middle, never found a step at the top yet though
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version