SOHC.co.uk Forums > Project Board
Doms CB550F1 project
Oddjob:
Rods were originally fitted with either green or brown shells Dom. Which is good news as those are easy to find. IF you need them of course.
IF you end up having to replace a rod you'll need to find another with the weight code E on it. Might be easy, might be hard.
DomP:
I can't make any sense of the crank markings, would they all be same across the entire crank? I forgot to pick up a socket to grind down today as well so I'm at a bit of a loose end tonight
Deano400:
Like these markings in yellow Dom. Ignore the red marks.
[ Guests cannot view attachments ]
Deano400:
This is a good example. More often very difficult to see.
DomP:
--- Quote from: Deano400 on September 11, 2023, 05:43:16 PM ---This is a good example. More often very difficult to see.
--- End quote ---
Thanks matey, I can see the marks just not able to work out what they say as mine are black. I've butchered one of my 6 sided 12mm sockets now so I've had the conrods off, all looks good on the shell faces and crank.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version