SOHC.co.uk Forums > Project Board
Doms CB550F1 project
McCabe-Thiele (Ted):
I have my old one from my 500 if its the same size .
I'll check it for condition foc postage only if it helps.
Laverdaroo:
I’ve a spare re plated one if not Dom
Sent from my iPhone using Tapatalk
McCabe-Thiele (Ted):
Just had a look for it in the garage but part is not where it should be then I remembered why.
My original steel 500 rear spacers I posted out to Max who made exact copies of them - when I fitted the SS copies the rear wheel did not sit centrally.
That is when I found out that my bike had the wrong spacers fitted. Max supplied the correct ones - I binned the old steel ones as I have no idea what they were off.
I do however have the wrong sized ones in SS that are useless, sorry if I have built your hopes up - I should have looked before I posted.
McCabe-Thiele (Ted):
The SS one I have is 38 mm deep spacer so almost certainly the wrong size.
Oddjob:
That is worryingly worn Dom, like the hub had been media blasted and the seal and spacer left in. You need to replace that. Max has them for sale on Ebay last time I looked https://www.ebay.co.uk/itm/156003857172?hash=item24528df314:g:Dm4AAOSwRrpk6SW8&amdata=enc%3AAQAIAAAAwFenbnOcq2gpA3mu2NrOTve8TZF3EgxbEA2Nuw3BfqG75mq%2FS64omy%2FXjNFgCKk2RVXyt0TxxsrawFG9Mj9edkyHCEgBLbNehVWpVJlSm0y9Fz1KZygQ1A0RkS2h2bKLA4jXLcCjv8eg1Q%2BqbRmWiiaRWjMEerUe5f%2BeiMox8YuLQeY6cI3o4iRleYLZSDVwx2AcG1RkM2t9S2nmI6c5Q%2BKp0wIAzJK4Ldmzt8OReob8gx7B4jbP3nfL9ZN8ncCHsQ%3D%3D%7Ctkp%3ABk9SR8rOxL2tYw
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version