SOHC.co.uk Forums > Project Board
Doms CB550F1 project
DomP:
--- Quote from: Oddjob on February 02, 2024, 10:04:09 PM ---That is worryingly worn Dom, like the hub had been media blasted and the seal and spacer left in. You need to replace that. Max has them for sale on Ebay last time I looked https://www.ebay.co.uk/itm/156003857172?hash=item24528df314:g:Dm4AAOSwRrpk6SW8&amdata=enc%3AAQAIAAAAwFenbnOcq2gpA3mu2NrOTve8TZF3EgxbEA2Nuw3BfqG75mq%2FS64omy%2FXjNFgCKk2RVXyt0TxxsrawFG9Mj9edkyHCEgBLbNehVWpVJlSm0y9Fz1KZygQ1A0RkS2h2bKLA4jXLcCjv8eg1Q%2BqbRmWiiaRWjMEerUe5f%2BeiMox8YuLQeY6cI3o4iRleYLZSDVwx2AcG1RkM2t9S2nmI6c5Q%2BKp0wIAzJK4Ldmzt8OReob8gx7B4jbP3nfL9ZN8ncCHsQ%3D%3D%7Ctkp%3ABk9SR8rOxL2tYw
--- End quote ---
It's from my rear wheel which the hub was totally knackered from the sprocket carrier wearing away so has been replaced and rebuilt, this is one of the only remaining pieces.
I think Roos offer or a stainless replacement from Max might be the best option.
Laverdaroo:
Its not stainless Dom, its just one I was practising my plating on, It came out really well but I had some SS ones to fit anyway, like I say, ,more of a practice piece but youre welcome to it once I get home and dig it out. I know where it is, just hope its the right size for you mate, should be 8)
Oddjob:
Ahh, the sprocket carrier oscillating would certainly cause that type of damage Dom. Explains that.
DomP:
I picked up my rear rim from the powder coaters this morning, laced it and trued up with minimal adjustments needed to get it within 1-2mm runout. Pretty pleased with how it's turned out, just need to get the front rim from Bryan collected and drop off for the same treatment. Oh and new spokes for the front to replace the ugly thick ones currently fitted.
DomP:
--- Quote from: McCabe-Thiele (Ted) on February 02, 2024, 09:06:09 PM ---The SS one I have is 38 mm deep spacer so almost certainly the wrong size.
--- End quote ---
Ted, I'm pretty sure 38mm is the correct size for my 550f1 assuming it is the sprocket side
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version