SOHC.co.uk Forums > Project Board
Doms CB550F1 project
DomP:
Bit of an update, made up a gauge and ignition brackets out of 2mm steel bent in a vice with lots of mapp gas, lots of hacksawing and even more filing. Really happy with the results!
DomP:
Ignition bracket
McCabe-Thiele (Ted):
Good bit of Metalwork there Dom - always a nice feeling to make something yourself.
DomP:
--- Quote from: McCabe-Thiele (Ted) on May 25, 2024, 11:30:22 AM ---Good bit of Metalwork there Dom - always a nice feeling to make something yourself.
--- End quote ---
Thanks Ted! Do you know if I'm barking up the right tree with my led's as I think you've done similar? Currently the fronts won't light up at all.
McCabe-Thiele (Ted):
With some LED's they need connecting with the right polarity - hope I'm not insulting your intelligence.
Some LED's are not Polarity sensitive but probably most are.
I tested mine with a slave battery - some come with good instructions.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version