SOHC.co.uk Forums > Project Board
Doms CB550F1 project
DomP:
At 2 turns out it seems ro run and idle better, it'll still start with no choke though from cold so must still be quite rich, until I can get to the bottom of why I have no speedo and rpm readings I can't really take it out nor play with carb fine tuning
DomP:
Bit of a snorkel question, apart from the obvious job it serves to keep out water is there any tuning or performance reason to have a snorkel fitted to the top of my filter lid or could I just mount some mesh over the lid opening?
Bryanj:
Originaly for noise supression in certain european countries (Germany) came with smaller jets as airflow restricted so if you use open lid would suspect you would need the 500 jets
DomP:
--- Quote from: Bryanj on June 18, 2024, 08:56:47 PM ---Originaly for noise supression in certain european countries (Germany) came with smaller jets as airflow restricted so if you use open lid would suspect you would need the 500 jets
--- End quote ---
I've got the lid Bryan so if I fitted the lid to narrow the opening and mesh it to prevent leaves etc would I be OK to run the standard 550f jets do you think?
Bryanj:
Dont know Dom, all you can do is try it and see
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version