SOHC.co.uk Forums > Project Board
Doms CB550F1 project
DomP:
OK, I'll go out and get a photo now. Regarding the 500 air filter, I though of making a bracket to bolt though the lower airbox hole to prevent the filter slipping down.
Nurse Julie:
--- Quote from: DomP on August 26, 2023, 08:02:59 PM ---OK, I'll go out and get a photo now. Regarding the 500 air filter, I though of making a bracket to bolt though the lower airbox hole to prevent the filter slipping down.
--- End quote ---
You could just use a 550 air filter Dom. There are 2 different 550 air filter boxes, one has a rubber cushion around it the other doesn't, as well as other differences in the air filter box set up between the 2 550's.
DomP:
--- Quote from: Nurse Julie on August 26, 2023, 08:14:24 PM ---
--- Quote from: DomP on August 26, 2023, 08:02:59 PM ---OK, I'll go out and get a photo now. Regarding the 500 air filter, I though of making a bracket to bolt though the lower airbox hole to prevent the filter slipping down.
--- End quote ---
You could just use a 550 air filter Dom. There are 2 different 550 air filter boxes, one has a rubber cushion around it the other doesn't, as well as other differences in the air filter box set up.
--- End quote ---
I used a 500 filter because I'm missing quite a few of the original airbox bits and Ken told me it's the easier option. Mine is the rubber cushion type.
DomP:
Trigger-
Nurse Julie:
--- Quote from: DomP on August 26, 2023, 08:20:06 PM ---
--- Quote from: Nurse Julie on August 26, 2023, 08:14:24 PM ---
--- Quote from: DomP on August 26, 2023, 08:02:59 PM ---OK, I'll go out and get a photo now. Regarding the 500 air filter, I though of making a bracket to bolt though the lower airbox hole to prevent the filter slipping down.
--- End quote ---
You could just use a 550 air filter Dom. There are 2 different 550 air filter boxes, one has a rubber cushion around it the other doesn't, as well as other differences in the air filter box set up.
--- End quote ---
I used a 500 filter because I'm missing quite a few of the original airbox bits and Ken told me it's the easier option. Mine is the rubber cushion type.
--- End quote ---
Ah yes, I remember seeing your photos now. If I remember, you had the piece with the stand on it but not the panching plate, which you can do without anyway.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version