SOHC.co.uk Forums > Project Board
Doms CB550F1 project
DomP:
It's not roadworthy enough yo put miles on sadly Ted, the rear hub is buggered and I can get it to idle without stalling as yet. Just done the valve clearances and I think I should check the set up of the Dyna S ignition to be sure it's not set incorrectly. Not sure how it's set up but I'll do a google
DomP:
Why isn't there enough adjustment in my electronic ignition? To set a timing light to come on t the F mark with the advance at full it won't rotate far enough. I'm a bit stumped
McCabe-Thiele (Ted):
You can do the Dyna S like points statically or dynamically.
Okay without going back over your post have you cleaned the carbs & bench synched them?
Oddjob:
Can't remember which it is now but one electronic ignition is set at full advance. So rev to 4k and set it there and see if that works better
Trigger:
https://www.google.com/search?q=set+up+a+dyna+cb550&rlz=1C1YTUH_en-GBGB1002GB1002&oq=set+up++a+dyna+cb550&aqs=chrome..69i57j33i160l2.11336j0j7&sourceid=chrome&ie=UTF-8#fpstate=ive&vld=cid:7c85c45c,vid:q7oy8RSB9Vs
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version