SOHC.co.uk Forums > CB350/400

Oil flow schematic

<< < (2/3) > >>

Oddjob:
If you need the insides I have some spares, waste throwing away a good bolt head, if the heads knackered anyway no harm done.

McCabe-Thiele (Ted):
Just something I have noticed the better bolts as well as some having more cross drilled holes for the oil through flow in the shaft also have different end bolt head size 17 mm .

I think you can fit the CBX1000 bolt 15420-300-020P others here will confirm iirc.

Matt_Harrington:

--- Quote from: Oddjob on August 16, 2023, 06:42:00 PM ---If you need the insides I have some spares, waste throwing away a good bolt head, if the heads knackered anyway no harm done.

--- End quote ---

The head is fine (17mm) but the 'cup' is not - let me know....

Oddjob:
Original bolts have a 14mm head. Insides should be the same though.

Bryanj:
12mm Ken, so it couldnt be overtightened in theory! 3/16 whit hammer fit when rounded

Navigation

[0] Message Index

[#] Next page

[*] Previous page