SOHC.co.uk Forums > CB750

CB750K2 petrol tank not venting

<< < (3/3)

sprinta:
Thanks Graham.

That shows mine was the same way when I took it apart, so it was correctly assembled and therefore not the likely cause for mine seemingly not venting?

Not sure as to if the small o-ring on mine has any relevance and may just have been fitted on the screw so that if it unwound it would not fall out?

Thanks for your help, much appreciated.

Trigger:
I did notice that when i took the cap apart that, all 3 plates have a vent hole in them and all were inline with each other  ;)

sprinta:
Thanks, that's something that I can do as I did stagger them. Grasping at straws possibly, but worth a try.

Navigation

[0] Message Index

[*] Previous page