SOHC.co.uk Forums > CB750

CB750K2 petrol tank not venting

<< < (2/3) > >>

paul G:

--- Quote from: McCabe-Thiele (Ted) on August 23, 2023, 12:53:23 PM ---Can't you just pucker your lips & blow into the cap from the underside to simply test it?

--- End quote ---
I have seen a few women that could  ;D ;D ;D :o

Trigger:
Julie was filling up with fuel today and i noticed that her cap on her mongrel had a non sealed cap and is a aftermarket one. Took it apart but, it looks very simple compared to yours .





[ Guests cannot view attachments ]



[ Guests cannot view attachments ]



[ Guests cannot view attachments ]  

sprinta:
Thanks Graham

If you carefully peel away the outer gasket it will separate the two plates and you should then see the inner gasket and smaller plate. Could take a photo of it and that would hopefully show if it is as my 1st or 2nd photo and therefore, which one should assume it the correct way.

Have you come across the small o-ring? you may find it between the two plate which would also locate its position?

sprinta:

--- Quote from: McCabe-Thiele (Ted) on August 23, 2023, 12:53:23 PM ---Can't you just pucker your lips & blow into the cap from the underside to simply test it?

--- End quote ---

Have tried that, but it is not very conclusive one way or the other.

Trigger:
No o'ring and looks like this .




[ Guests cannot view attachments ]

Navigation

[0] Message Index

[#] Next page

[*] Previous page