SOHC.co.uk Forums > CB500/550
Left side handlebar switch question?
deltarider:
Have you identified your model bike? That would lead you to the appropiate wiring diagram.
If you suspect you're dealing with an aftermarket switch unit, this may help: https://honda4parts.nl/product_info.php?products_id=3434&language=en&ceid=fcbfa29501f44034d4f2dd06ff72ad01
McCabe-Thiele (Ted):
My switch does not have the buzzer wire, only difference in the remaining wire colours is I have Black/Yellow instead of Brown/Red my other 7 wires are identical.
deltarider:
Still don't know what 'area code' your model is, but anyway, don't be fooled by wires and connectors which are not connected. You'll find them on any model. For instance my model has the wires lightblue white and orangewhite in the headlamp bucket for the -A models, but they were not connected on models for Europe. If you cut them, you have two spare wires ending in a perfect Y connector which can be used for something else.
Oddjob:
Just bought 3 switches, 2 dismantled but almost complete, casings unbroken. Both off a 550f by the look of them. The other is a l/h 550k3 switch. Looks ok and complete. Will get all the casings ceramic coated and clean up all the contacts etc then sell them on. The k3 one is kinda rare these days. All genuine btw.
McCabe-Thiele (Ted):
As far as I know my 500 is mostly K1 a UK model but there was a USA rear fender fitted. Not unusual for a 50 yrvold bike.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version