SOHC.co.uk Forums > CB350/400

Missing stays

(1/1)

Athame57:
The hook shaped harness stay below the steering head (arrowed in image) is missing on my bike and given that I can't find it on CMSL diagrams I guess it isn't a separate part but a thing that was welded to the frame from the start as is the much smaller one a bit further back, the latter snapped off by my own hand (ham-fistedness ::) )
I'm now considering having replacements cut and welded on, but is it worth the trouble? Opinions?

Deano400:
It bolts on.

https://www.cmsnl.com/products/clip-d-harness_32123375000/

Athame57:
Thanks for this Deano, I didn't spot on their diagram. I see it isn't available, must try Steve at 400Four bits or wait my chance.

Oddjob:
Just make one. A small sheet of 1mm alloy and cut to shape, cover the end in self adhesive shrink wrap.

Athame57:

--- Quote from: Oddjob on August 27, 2023, 10:27:23 PM ---Just make one. A small sheet of 1mm alloy and cut to shape, cover the end in self adhesive shrink wrap.

--- End quote ---
I may do that for the small stay. Meanwhile it turns out that gold mine for extinct bits called 400Four bits has one, so I've ordered it!  ;D

Navigation

[0] Message Index