SOHC.co.uk Forums > CB500/550

Ash's coil fix

(1/2) > >>

DomP:
For those that have done the coil fix that Ash has detailed in Aladdinds Cave, is there a more readily available filler such as silicone that can be used?  I can't justify ordering such a large amount of high dielectric epoxy just for four holes, I've got ordinary epoxy resin if that would work?

Trigger:
it is only the price of a pint >>> https://www.ebay.co.uk/itm/402939621383?hash=item5dd112b007:g:MwkAAOSwf3JhVH4v&amdata=enc%3AAQAIAAAAwNdLV%2B1pWqq4oEkeojTO8Hy8d7NWKuuzlmBA0cW%2BiQpoQdf62BTNcxVPAeuB%2BI53D2l2tV805Dh2%2BY8Ikj3OXEZ1UBE%2BlY4yaZ7ovI3Njn2gXkoIz2E8LqsaEhBGST7PIib3scx3UjElIdBThFZj5KChNYpVMbmIOfQLyuC2Bt5XW58cEblovo1LLIiQKpcHjLbEqJOAk4upMSccQVswWjCOLUiaqBttxrTEzK9QspJcz%2BsZtXiGqhCFM49yd0rxiQ%3D%3D%7Ctkp%3ABlBMUM7R343IYg



https://www.ebay.co.uk/itm/222871500567?epid=26033707478&hash=item33e42d3717:g:zRMAAOSwPnNan9~j&amdata=enc%3AAQAIAAAA0ELV2%2FA0uSKDp1AM5igYFpg4HQFRbHqVM7fmB221mQeexKb5GZEsE5TJo0dSKnrdurTPWeeJirEOcG%2Biy3lF8Yj237jqBY6zFkNKXjdByZAytMVKbsCvVnktGP1M5SN6JBUGVl17lzj6lFhUw3gv4SDbTCj28l%2F2oLMLePLRsm1LBDMCmIxtxdF25F61FQc9n1mDNyEjzZirmxLZlNumYp73UbT689LFiW6L87p4f3YkJOl%2FairVmFAefHH%2F07Ak64Oy%2Fs9Q6LURu2b5RCcrTjg%3D%7Ctkp%3ABk9SR87R343IYg

DomP:
Thats just the top covering rather than the sealer so not dielectric

Trigger:
Ash did a load of coil for me some years ago now as, a trade for some parts and labour, He asked me to supply the Beru cable and some boxes of Milliput, i don't know if he used anything else.  ;)
 

AshimotoK0:
I used the RS potting epoxy because I have used it for around 30 years and it has guaranteed dielectric properties. I messaged the manufacturer of the black epoxy putty about its electrical properties but they couldn't guarantee anything. You may be OK with Araldite but the non-rapid version if you can still get it. Do not use silicone as it's not physically strong enough and nothing will bond onto it.

Navigation

[0] Message Index

[#] Next page