SOHC.co.uk Forums > CB500/550

motad exhaust on cb500 four

<< < (2/3) > >>

Trigger:

--- Quote from: mickwinf on September 02, 2023, 11:53:10 PM ---Cheers Graham, I don't have a bracket at all but remember when I got a brand new mot ad it came with 2 brackets depending on which model. Thought I still had the bracket but can't find it.

--- End quote ---

If you get stuck Mick, send Julie a message and she will dig them out.
Is this a Stainless steel Motad or the mild steel one ?

SteveW:
The rear Motad  bracket is made of toffee, my centre stand managed to bend it up in a matter of days causing the stand to rattle against the exhaust.
You’ll probably have to fabricate something stronger.

mickwinf:
Yes steve as I recall they are thin ally, not very substantial. Graham mine is mild steel with some pitting, I will save up to buy an original style one later.

Trigger:

--- Quote from: mickwinf on September 03, 2023, 10:40:54 AM ---Yes steve as I recall they are thin ally, not very substantial. Graham mine is mild steel with some pitting, I will save up to buy an original style one later.

--- End quote ---

The ones i have in the store room are just the metal type.
Once you are at the stage of the frame and engine is done, everything else is jut bolt on  ;)

mickwinf:
Exhaust fitted using a home made bracket, not pretty but strong!

Navigation

[0] Message Index

[#] Next page

[*] Previous page