Other Stuff > Misc / Open

I suspect Ken is right about the quality of Gerben work look at my 500 carbs!

<< < (8/9) > >>

McCabe-Thiele (Ted):
Hi Florenece I will PM you - what is the loose metal collar on the shaft  in the second photo?

florence:
not sure, just part of the setup

Oddjob:
It's not meant to be on there. It looks like the cap on the lifter arm, the one that covers the felt washer.

McCabe-Thiele (Ted):
I've just assembled Carb:1 the float level was 22 mm as per the manual.
On  taking Carb:2 to bits today I was surprised to find silicone type sealant was used both on the carb top gasket and for the fuel bowl O rings.

Bryanj:
Not by me

Navigation

[0] Message Index

[#] Next page

[*] Previous page