SOHC.co.uk Forums > SOHC Singles & Twins
My first project - 1974 CB360 K0
K2-K6:
--- Quote from: AshimotoK0 on September 19, 2023, 01:34:59 AM ---Pretty looking bike but much maligned because of the fragility of its top end and the un-necessary gimmicky 6th gear.. The cam runs in the alloy head so if it picks up and scores the journals you are talking a replacement head as well as cam and probably rockers. Decent used cams are very rare as are the cylinder heads with decent bearing surfaces, Acres of chrome so very expensive bike to rechrome.
So a bit of a gamble really. The problem stems probably from the fact that you can't access the centrifugal oil filter without removing the exhaust and clutch cover, so cleaning the filter was probably often skipped. The earlier K models had a removable plate to gain access to the oil filter plus they had replaceable cam bearing covers. Shares quite a few parts with the 400/4 ..like forks and wheels/brakes.
--- End quote ---
I agree with you Ash, a good looking bike from that era. I like the USA spec short rear mudguard and having a good drum front brake a little different from others to own as well as being good brakes.
Of course there's risk in buying anything old in regard to internal wear, depends on the attitude to what you could waste if you bought it too. Maybe an attractive offer to the dealer could swing that bias for purchasing it as if would cap the loss, if it's an internal disaster, to that entry price. Just another way to look at it.
The oil filter, I hold a differing view on this to maybe a conventional analysis. The filter can only ever filter out bits that have come off into the flow from oil failure of some description. Concentrate on oil specification and condition and the problem usually won't occur. Running a few notable poor camshaft reputation engines, I make every effort to stop it happening primarily and with good results. That clearly can't account for previous history here, but believe there's a decent route in discussion to run one from now in avoiding pitfalls.
Skoti:
I'd buy that if the engine is in the condition the seller states it is.
Just service it and clean it up, don't fix stuff unless it's broken, then run it with it's lovely patina looks.
For £1495 it's cheaper than a new Chinese scooter.
However if you're looking for something to fully restore avoid this, because as Bryan points out parts could be rare and expensive. You'll spend way more than it's worth and then find it's not all that re-sellable
BTW
my brother bought a new CB360G5 back in days, a much underrated bike IMHO.
good luck
Skoti
Oddjob:
--- Quote from: AshimotoK0 on September 19, 2023, 07:25:27 AM ---
--- Quote from: Oddjob on September 19, 2023, 06:02:59 AM ---My advise is just one word.
Don’t
--- End quote ---
Did you actually own one Ken? Or was it your experience in the workshop at Queenies of them?
Funnily enough, a few years back, I had a blue G5 250 with only 2K genuine miles that I pulled out from a damp shed basically got it for free... ..... Long gone now and the buyer did an awesome job restoring it but when I brought it home and cleaned it up my, kids said it was one of the best looking bikes of all of the ones I have ;D and wanted me to keep it ! It was a very late one, with the cam chain tensioner sorted out at the factory (another early Achilles Heel point :( ) ..... pics attached are 'as I found' and after the buyer restored it.
Plus the 360 version may be a lot less gutless than the more maligned 250. I think if the cam and head were OK on this it would be a decent project but there's the rub .. . Also pretty sure that Brituro amazingly do repro silencers (or they did) for that model. Another plus is that they are all painted in metallic, not candy paint, so cheaper to repaint and Piki does excellent tank stripes. The guy at Summerbud (Nick? ) recently did some marathon run on a 360 version one for a charity event
On the CJ that replaced it they lengthened the forks and swinging arm, ditched the electric start and 6th gear and got rid of lots of the chromed bits. Now that model really is a Marmite bike with unobtanium 2 into 1 exhaust system as standard. Charlie at Oxford classics had one last year that some bloke had fitted NOS parts inc exhaust seat etc but it had gained a 'patina' in storage, which put me off recommending it.
--- End quote ---
I did a couple of foreigners on them and the test rides were eventful. Slow, not as slow as the CJ version but so slow it just put me off. TBH it's not a bad looking bike but god it's slow. I like something that goes when you twist the throttle and this ain't it.
cbxman:
--- Quote from: Oddjob on September 19, 2023, 01:34:04 PM ---
--- Quote from: AshimotoK0 on September 19, 2023, 07:25:27 AM ---
--- Quote from: Oddjob on September 19, 2023, 06:02:59 AM ---My advise is just one word.
Don’t
--- End quote ---
Did you actually own one Ken? Or was it your experience in the workshop at Queenies of them?
Funnily enough, a few years back, I had a blue G5 250 with only 2K genuine miles that I pulled out from a damp shed basically got it for free... ..... Long gone now and the buyer did an awesome job restoring it but when I brought it home and cleaned it up my, kids said it was one of the best looking bikes of all of the ones I have ;D and wanted me to keep it ! It was a very late one, with the cam chain tensioner sorted out at the factory (another early Achilles Heel point :( ) ..... pics attached are 'as I found' and after the buyer restored it.
Plus the 360 version may be a lot less gutless than the more maligned 250. I think if the cam and head were OK on this it would be a decent project but there's the rub .. . Also pretty sure that Brituro amazingly do repro silencers (or they did) for that model. Another plus is that they are all painted in metallic, not candy paint, so cheaper to repaint and Piki does excellent tank stripes. The guy at Summerbud (Nick? ) recently did some marathon run on a 360 version one for a charity event
On the CJ that replaced it they lengthened the forks and swinging arm, ditched the electric start and 6th gear and got rid of lots of the chromed bits. Now that model really is a Marmite bike with unobtanium 2 into 1 exhaust system as standard. Charlie at Oxford classics had one last year that some bloke had fitted NOS parts inc exhaust seat etc but it had gained a 'patina' in storage, which put me off recommending it.
--- End quote ---
I did a couple of foreigners on them and the test rides were eventful. Slow, not as slow as the CJ version but so slow it just put me off. TBH it's not a bad looking bike but god it's slow. I like something that goes when you twist the throttle and this ain't it.
--- End quote ---
You must have had a dud!. I have just bought one. I was really surprised how torquey it is. Very happy to tool around on this bike and I'm used to something rather bigger.
Really pleased with it. Just spending a few bob on it to tidy it up.
Oddjob:
One might have been a dud but both? Maybe our definitions of slow are different, when I was testing these it was back in the days of my production racing and that sort of skews your views on speed I'd imagine. Oddly I found the 250N a much better bike. The 400N even more so.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version