SOHC.co.uk Forums > CB350/400

Rear Brake Pedal Adjustment

<< < (2/2)

McCabe-Thiele (Ted):
I had a similar issue as you regarding the missing dot marks thought I did eventually find a feint mark on the front brake pivot although my aftermarket pedal did not have a dot.

I worked from the rear brake shoe pivot where the rear lever fits going  forwards eventually finding the right amount of leverage to position the brake pedal lever something close to where it should be.

I initially had insufficient thread on the rear adjuster nut so ended up with a compromise that was finally resolved when the new rear brake linings had bedded in, I had a full thread into the nut after a 100 miles or so when adjusted again.

Oddjob:
Yeah, about 10mm protruding through the dowel that fits inside the rear brake arm.

Arm rear, lever front.

Navigation

[0] Message Index

[*] Previous page