SOHC.co.uk Forums > CB500/550
It’s home at last!
Sesman:
Keep at it. That’s starting to look really good.👍
Oddjob:
Johnny, you got any of those abrasive discs I use and a Dremel, if so the rest will be easy to remove. Where that deep small dent was try knocking that from the back like the dent and that will pop it out so you can flat it right down.
Glad to see my memory wasn't at fault, need a fairly long pin punch but easy if you have one of them.
Johnny4428:
Thanks Ken, never thought about the rotary machine with the small sanding disc. I’ll be on to that next time, might be Friday. I have the dent knocked out, you mean actually raising the metal thereto then flatten out?
Oddjob:
Not the dent Johnny more the small stone strike above it, I found the dent knocks through to the back of the plate, if you knock it back the outer surface can then be flatted so the strike mark disappears. The discs are like small flap wheels, of various grades, roughest 80 up to 2000 grit. You have 2 mounted on each mandrel.
Johnny4428:
I’m with you, never tried the discs. But I’ll have a go.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version