SOHC.co.uk Forums > The Black Bomber Board

M10 DOME Cylinder NUTS HEX

<< < (8/20) > >>

AshimotoK0:
I found a Black Bomber original 17mm AF dome nut and it fits both a 1971 CB500K0 frame and a 1964 CB72 Frame so pretty sure original was M10x1.25 Mo and this tallies with the 1967 Honda threads Service Bulletin  (i.e thread pitch was unchanged after 1967 but AF reduced from 17mm to 14mm). So a bit of a mystery why yours is 1.5mm pitch. But hey-ho if it fastens up OK then all fine.

mo goldie:
well what can I say but the new Nuts turned up today and yes indeed they are M10 1.25 pitch thread and A/F 17mm
and all on and looks great Now so well chuffed.

cheers all

Mo

Oddjob:
So ling as you’re happy, that’s all that matters.

mo goldie:
oh one more thing just to ask anyone........ there is a small amount of play in the swinging arm, I packed in some more Grease via the grease nipple but made no difference ...is there meant to be any play at all or is a bit ok ?
 

Oddjob:
No play, even a small click can make it fail an MOT or at least get an advisory.

Navigation

[0] Message Index

[#] Next page

[*] Previous page