SOHC.co.uk Forums > The Black Bomber Board

M10 DOME Cylinder NUTS HEX

<< < (16/20) > >>

K2-K6:
Well done private investigator Mo  ;D

Great youve got it sorted out.

AshimotoK0:
So pleased you now have in your possession Mo.
Sorry for the hassle you had getting it delivered.

Oddjob:
I'd have asked why they hadn't come round with it when they knew it wasn't theirs.

mo goldie:
well I did ask her why she said she been Busy.......... I wanted to say so have I but still found the time to do the running around to get it tho........ and twice too.

But all good Now........ Thanks again everyone for all the help and Thanks ashley for selling it to me  8)


Cheers a happy mo  ;D

mo goldie:
Hi Guy`s

Just an update on the Bomber, well the parts came from Dave silver so I made a start this morning took off the rear Mudguard and the rear wheel and got the shaft out only to find there was Not much Grease in it what so ever, anyway the bushes looked ok so I done what Ashely said and the New old stock Collar fitted in a treat with No worries. so put all new parts in ( so got a new set of bushes for spare ) fitted it back in the frame and there is No Movement from side to side Now so all good,

and the up and down is nice and smooth too. I found out also that the Grease Nipple was Not letting any grease go in though the shaft so heated that up with a blow lamp and cleared that all out just need to force some more in to make sure that the cavity is all full up unlike it was so must have been why it got worn in such a shout time as was only done about 3 1/2 years ago so the bloke said who i got it off.  and it had only done 1,500 miles....... but ha Ho all done now.

Happy man

Mo   

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version