SOHC.co.uk Forums > CB750

Motul oil

<< < (4/5) > >>

McCabe-Thiele (Ted):
On my 500 when I removed the rear lever with the tumbler type wheel (not the one at the front) I found the pivot was partly broken so fitted a new one. That said my gearshift was just a tad clunky.
Mild surface rust where it appears the bike has stood.

Only thing that stands out a bit for me though it might be normal is the poor visual match of the casings at the gearshft bearing.

Pauarc:
I just looked on bike cover still off I see what you mean but the front and back line up spot on also there’s alignment Dowls I just think it’s the clutch dragging going to strip the clutch again and look at basket as Martin spotted marks on the outer

McCabe-Thiele (Ted):
There are 750 members here who might help plus Trigger.

Skoti:

--- Quote from: Pauarc on November 02, 2023, 12:19:21 PM ---Picture of linkage can anyone see any problems

--- End quote ---

I can't be sure from the photo, but is the spacer missing from the selector drum stopper arm, because the spring looks coil bound and over tightened?


Good luck with your fault finding

Skoti

Pauarc:
The spacer is in there  as charged stoper ring thanks Skoti

Navigation

[0] Message Index

[#] Next page

[*] Previous page