SOHC.co.uk Forums > CB350/400

400F fork oil capacity question.

(1/6) > >>

McCabe-Thiele (Ted):
The manual here says 105 cc for replacement / 125 cc from strip down.
Quite a few sites mention 145-150 cc.
I did wonder if there were variations in volumes due to any change in the design of the fork internals.
Can't rely on the fluid I removed as a measurement as one side was very low.

I'm intending to use 10W fork oil.

taysidedragon:
I can't remember the quantity that I  put in mine. I used the figure in the Clymer manual and the suspension is great, no issues. I can't check at the moment cause I'm  away from the house.

Matt_Harrington:
125cc when refitting and 105cc when refilling - at least that is what it says in the Honda Manual!

Johnwebley:
Never used 10w fork oil,

I tend to use  ATF,

only personal preference

Sent from my SM-A546E using Tapatalk

McCabe-Thiele (Ted):

--- Quote from: Johnwebley on December 17, 2023, 02:23:52 PM ---Never used 10w fork oil,

I tend to use  ATF,

only personal preference

Sent from my SM-A546E using Tapatalk

--- End quote ---

I read that Honda used ATF in the early days - which of the many ATF grades did you use Dexron 2 ?

Navigation

[0] Message Index

[#] Next page