« previous next »
Pages: [1]   Go Down

Author Topic: con rod bolts  (Read 3214 times)

Offline tonywright

  • Newbie
  • Posts: 1
    • View Profile
con rod bolts
« on: January 23, 2024, 01:17:51 PM »
I'm rebuilding a CB750 K3 engine and have purchased ne con rod bolt part number 13213-333-003 these supersede the originals which are no longer available. Does anybody know the torque setting for these ? Thanks, Tony.
Logged

Offline Jan B

  • SOHC Associate
  • Posts: 65
  • Everything you can leave behind is a gain
    • View Profile
Re: con rod bolts
« Reply #1 on: January 24, 2024, 08:38:24 PM »
Reading through the service manual (Ash's dropbox) i come across the value of 14.5 ft-lbs
Logged
CB500K1
CB750K2 [project]
BMW F800GS

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 8622
    • View Profile
Re: con rod bolts
« Reply #2 on: January 24, 2024, 08:52:31 PM »
Quote from: Jan B on January 24, 2024, 08:38:24 PM
Reading through the service manual (Ash's dropbox) i come across the value of 14.5 ft-lbs

Similar to the 500  conrod nuts then at 14.5-15.9 ft-lbs.
Logged
Honda CB400NA Superdream (current money puddle)
Honda CB500 K1 (second money pit)
https://www.sohc.co.uk/index.php/topic,28541.0.html
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html
This is a neat 500 restoration in the USA.
http://forums.sohc4.net/index.php/topic,151576.msg1731556.html#msg1731556
Pages: [1]   Go Up
« previous next »