SOHC.co.uk Forums > CB350/400

Gummed up Carbs and modern fuel

<< < (4/4)

exvalvesetdabbler:
I guess from the reply above that the emulsion tubes aren't in the keyster kits. I emailed nrp carbs and got a reply saying that the needle is there, because I only need the needle and tube I might have to bite the bullet and order the OEM ones  from Dave Silver.

The pilot circuit is separate to the main jetting but I assume that at low throttle settings where the vacuum is still high, it was sucking a bit from the main jet which was swamping and small changes you would expect to get from twiddling the pilot air screw.

Regrds
Dave.

Navigation

[0] Message Index

[*] Previous page