SOHC.co.uk Forums > CB500/550

Will it fix?

(1/8) > >>

Johnny4428:
Going to fit a new seal in this today but dissapointed to find this tacho drive broken. What’s the chances of a repair? Nothing to lose.

Johnwebley:
I don't know,

I would clean both joint surfaces with brake cleaner,

Use a good adhesive, something that lists metal,

Apply to break as per instructions,

Leave in a warm place and see what happens,

There is hardly any load on it,

If it does stick, you might want to reinforce by drilling tiny holes down through the break, fill the holes with glue and push small pins in the holes,



Sent from my SM-A546E using Tapatalk

McCabe-Thiele (Ted):
That JB Weld is pretty good.

Bryanj:
They are available pattern but sit down before you check the price, all 500,550 are the same

Johnny4428:

--- Quote from: Bryanj on March 06, 2024, 10:35:13 PM ---They are available pattern but sit down before you check the price, all 500,550 are the same

--- End quote ---
Already checked Bryan!😳

Navigation

[0] Message Index

[#] Next page