SOHC.co.uk Forums > The Black Bomber Board
67` Bomber running problems
mo goldie:
Hi Ash
This is what he sent back so if you Know what he is on about can you have anther look at the sprocket please to give him the more info.
Hi, You have not said what chain pitch you have but I assume it is 530. The 4 mounting bolt holes distance apart (known as the p.c.d.) is taken from the centres of the bolt holes.
I make it 74mm centre hole as there is nothing listed with 73.7mm. The p.c.d. at 110mm with 10mm bolt holes.
Is the sprocket flat on both sides or a recessed ring on the inner face? I think it might be 280 sprocket type but I now need to check to see if this is still available.
AshimotoK0:
--- Quote from: mo goldie on May 20, 2024, 08:06:46 PM ---Hi Ash
This is what he sent back so if you Know what he is on about can you have anther look at the sprocket please to give him the more info.
Hi, You have not said what chain pitch you have but I assume it is 530. The 4 mounting bolt holes distance apart (known as the p.c.d.) is taken from the centres of the bolt holes.
I make it 74mm centre hole as there is nothing listed with 73.7mm. The p.c.d. at 110mm with 10mm bolt holes.
Is the sprocket flat on both sides or a recessed ring on the inner face? I think it might be 280 sprocket type but I now need to check to see if this is still available.
--- End quote ---
May be simpler if I donate my used one to you to give him. Just pay postage.
mo goldie:
Well he is just a bloke on Ebay Ash so don`t know how good he is..........as he just asked to supply the dimensions so he could check to see if they is one to match it ..... so if you can just tell me if it is flat on both sides will due I think.
Bryanj:
Part number is 41201283000 so i would say 283 not 280 but that is a pure guess
mo goldie:
You have lost me with that one ?
tried them in DSS and all discontinued
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version