SOHC.co.uk Forums > CB350/400

Fully restored CB400/4 on eBay

<< < (6/12) > >>

Orcade-Ian:
Yes, it did seem to be rather low priced, probably cost more to do than what it went for.  Perhaps we might eventually see the new owner on here and find out how much of a bargain it turned out to be - unless they are already a member of course!

Ian

Athame57:
Looking at some of the photos I noted the rear axle nut seemed to be on back to front, which in turn can only mean the axle is too, so I checked on the CMSL diagram, but no, it is ME that has it on back to front!  :o ( see image) ding dong...was it me that started this or a mechanic in the past? Thing is....does it actually matter? :-\

McCabe-Thiele (Ted):
You are not alone my 400 has the nut on the left hand side.

In the Honda Parts List it is shown with the nut on the left hand side.
Might be it's been shifted to the right side so the silencer is not in the way.

Athame57:

--- Quote from: McCabe-Thiele (Ted) on April 23, 2024, 03:36:20 PM ---You are not alone my 400 has the nut on the left hand side.

In the Honda Parts List it is shown with the nut on the left hand side.

--- End quote ---
I'm glad there are at least two nutters on here then! Ted, my picture shows it on the right hand side. ;D

florence:
It makes sense to have the nut next to the sprocket as that is where the greatest force will be trying to displace the wheel from centre.

Navigation

[0] Message Index

[#] Next page

[*] Previous page