SOHC.co.uk Forums > SOHC Singles & Twins
CB360 Wiring question
Craizeehair:
You know what Ted, that could make sense as there definitely wasn’t one when I dismantled the bike, has a brake switch that looks jut like that though.
Off to get the parts manual!
McCabe-Thiele (Ted):
To fit them you just remove the lever & feed it in - it has a slot that slides into the lever bracket.
Mine fitted but I had to file the end pin down very slightly to get it to work properly.
The wiring colours were different but easy to see how it connected - only two wires!
Craizeehair:
Just had a real quick look before we get ready to go out and it seems as though these early bikes might not have had a clutch switch.
There’s also a brown wire and a green and red wire both free and not connected in the headlight bucket and after a really quick look at the wiring diagram I think these may not be connected to anything either, could be pains over if I’m lucky???
Will have a few hours to muddle through something tomorrow, thanks for all the input, much appreciated.
Bryanj:
Brown wire goes to the small bulb in headlight in uk which is not fitted in us, unfortunately it is a requirement to have an "obgliatory" light in uk and would fail mot if not there plus if you got a knowlegable plod( both words in one sentence) it could be an offence.
Depending on light size there are plenty of units out there.
Green and red may be neutral switch to idiot light wire
McCabe-Thiele (Ted):
The 360 ones on eBay look quite different.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version