SOHC.co.uk Forums > SOHC Singles & Twins

CB360 Wiring question

<< < (5/7) > >>

Bryanj:
In that case it should have the clutch switch and brake light switch which are the same except wire colours and only you will see them, if you have problems locating them try the 125 single with drum brake

Bryanj:
Just for you cos i was bored, motorcycle products with SKU: 006389 and look at attached screen shot.
Check if you need anything else to cut down post costs, i have bought several parts from them with no problems

Craizeehair:
That’s very good of you, many thanks.

So to confirm, this will work as the clutch switch, just ignore the wiring colour difference and fit accordingly?

Bryanj:
Correct

Craizeehair:
A quick question for those in the know please?

I’ve got the wiring harness back on the bike and all the electrical components are now connected again.

Does anyone know if this bike will have daytime running lights? When I got the bike, the headlight wouldn’t work on low beam. I’ve stripped and cleaned the switch gear and now the low beam works but the front two indicators come on with a permanent low light. I initially thought that I had got something wrong but a quick check looks ok. I don’t want to start chasing a problem that isn’t there. From what I can see online, it does seem as though they could be?

Navigation

[0] Message Index

[#] Next page

[*] Previous page