SOHC.co.uk Forums > Project Board
Mike's CB550 Project
Mike_Berkshire:
If things go according to plan I should have the wheels back at the end of this week or start of next. When refitting the (new) rear sprocket do I need new tab washers or can the old ones be re-used. Im guessing not but thought it worth the ask. Cheers, Mike
Bryanj:
As with all things yes with care
Oddjob:
I've reused them loads of time Mike, it all depends on how you remove them, do as little damage as possible.
Johnny4428:
They usually quickly weaken and break off if you try and bend ones that have already been bent. Good idea to fit new. Maybe the ones I tried to reuse had already been recycled.
Mike_Berkshire:
Thanks gents - I was careful when removing them so will see how things go back together with the same ones. Mike
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version