SOHC.co.uk Forums > Project Board
Mike's CB550 Project
McCabe-Thiele (Ted):
Did you fit an inline filter, it can save a lot of work?
Mike_Berkshire:
I didn’t Ted as I have dual fuel lines from the fuel tap and I thought there wouldn’t be room. Maybe a poor decision!
K2-K6:
--- Quote from: Mike_Berkshire on March 15, 2025, 06:34:44 PM ---I didn’t Ted as I have dual fuel lines from the fuel tap and I thought there wouldn’t be room. Maybe a poor decision!
--- End quote ---
If you wanted to do this temporarily even, you can buy more pipe and route down under the carbs, site the two filters there in clear space, then route back up to the carb inlets.
It could be a pragmatic workaround while you deal with getting residual unwanted bits out of the system.
All mechanical things being in order ..... it's "always" fuel restriction against air supply that gives this hanging effect.
McCabe-Thiele (Ted):
I had to fit two of the alloy Aeroline filters, they hang partially under the carbs.
Mike_Berkshire:
I have a pair of new aero line filters and spare fuel line tubing so when I put the carbs back on I’ll do as suggested.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version