SOHC.co.uk Forums > Project Board
Mike's CB550 Project
Seabeowner:
I expect early 550s K0, K1s at least had the spacers with the 8mm bolts.
Later 550s have 7mm bolts then no spacers are fitted.
Mike_Berkshire:
Thanks; I’ll measure the bolt tomorrow.
Mike_Berkshire:
I have a bent idiot light console. Does anyone have any thoughts about how to remove the dent without cracking the casting? Thanks
Mike_Berkshire:
Whilst pondering on the dent I thought that I would start on the front brake. The 'free pad' on the piston side is seized solid in the caliper. Before I start getting brutal with it are there any tricks to prise it out/remove it? The piston is solid and the upper brake lines are removed as the brake fluid had solidified so I am not in a position to pump it out with the brake lever. Thanks
Bryanj:
Mike search gease gun method
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version