SOHC.co.uk Forums > CB350/400

Need to check out a slight misfire when cold

<< < (5/5)

McCabe-Thiele (Ted):
Nice one. 8) 8) 8)

Athame57:
I bet you had fun putting the carbs back in!  ;D Glad you have it sorted.

Mikep328:
Fortunately I didn't have to remove the carbs this time.  I pulled the #3 airscrew and shot the carb cleaner in with a plastic syringe/short piece of stiff tubing that I tapered at the end.  I managed to get a good seal with the taper in the airscrew fitting threads so there was a good bit of pressure with the carb cleaner so it cleared whatever may have been causing an obstruction.

Alexrayz:

--- Quote from: Mikep328 on August 13, 2024, 05:51:23 PM ---Fortunately I didn't have to remove the carbs this time.  I pulled the #3 airscrew and shot the carb cleaner in with a plastic syringe/short piece of stiff tubing that I tapered at the end.  I managed to get a good seal with the taper in the airscrew fitting threads so there was a good bit of pressure with the carb cleaner so it cleared whatever may have been causing an obstruction.

--- End quote ---
Marvellous!

Congratulations Mike ;)


Sent from my iPhone using Tapatalk

Navigation

[0] Message Index

[*] Previous page