SOHC.co.uk Forums > CB350/400

Valve Stem Oil Seals, Eight or Four?

(1/1)

Eldrick:
On my valve stems (Inlet Side) I have a rubber oil seal with a metal spring on its base. On the Exhaust side stems there are no such seals. My Workshop manual says I need eight and my Haynes Manual says I need four.
How many do I need please?

Bryanj:
Depends on year and who has worked on it previously, look at the top of the guides and if flat topped fit seals, if cone shaped do not. In these instances it would only be correct if seals were missing on exhaust side

Johnwebley:
On the 500,fit 8

The top of the guide should have a groove for the seal to locate



Sent from my SM-A546E using Tapatalk

Deano400:
On the 400/4 I have only ever seen the seals on the inlet guides. The inlet and exhaust guides are different part numbers.

Eldrick:

--- Quote from: Bryanj on June 19, 2024, 01:36:28 PM ---Depends on year and who has worked on it previously, look at the top of the guides and if flat topped fit seals, if cone shaped do not. In these instances it would only be correct if seals were missing on exhaust side

--- End quote ---

Four it is then.
Thanks

Navigation

[0] Message Index