SOHC.co.uk Forums > CB500/550

Spacers

(1/1)

deltarider:
In the parts box I came across two spacers (clutch) I've bought decades ago, for... just in case. I guess Honda has fitted these on assembly when a clutch showed a degree of play and none when there was no play at all. My own bike came with none and still does not need one. Am I right to assume it has little to do with wear? The smaller one is 0.5mm thick and the larger one 0.1mm. Why the outside diameters are different? No idea. :? By the way, the spacers are mentioned in all CB500/550 parts lists as optional parts either with ( ) or with an 'N'.

AshimotoK0:
I think Oddjob had some made a while ago and he sent me a couple FOC

Laverdaroo:
You can still message Ken on here but leave your phone number, he can’t message back. Think he’s got some sets left.


Sent from my iPhone using Tapatalk

Bryanj:
Yes they were optional to take out engineering tolerances, common to find non fitted

deltarider:
A member in the German forum worried after he had turned two CB550s into one and had three of these left over. I still don't understand why my 0,1mm spacer is bigger than the 0,5mm one. Were they meant to go in different spots?

Navigation

[0] Message Index