SOHC.co.uk Forums > CB500/550

Headlamp Rim Screws

(1/2) > >>

Mike_Berkshire:
Hi, can anyone tell me what thread size the 3 screws are that go through the bucket and into the threaded tabs in the chrome rim? I don’t see thread details in the parts book. The diameter seems to be between m4 and m5. Many thanks.

McCabe-Thiele (Ted):
They are a standard metric thread as I used some small Allen Key headed ones on my 500 that I had in a box of mixed metric ones - I suspect they are M5 but not 100% sure. I assume you mean the three that secure the headlamp rim & internals to the bowl.


Update parts book shows them as M5 x 16 mm this is confirmed in the middle section of the part number as well as the downloadable parts book p/n 93500-0516-0B the little spacers are not cheap..

SteveW:
Pretty sure they are M5.
Only time I’ve come across M4.5 threads was for the vesa mount on my old Samsung TV.
My Lambretta has some M7 bolts if I remember correctly.

mickwinf:
Nurse Julie sells them

Mike_Berkshire:
Thanks guys. Must be m5. I’ll get some m5s. Mike

Navigation

[0] Message Index

[#] Next page