SOHC.co.uk Forums > CB350/400

Those little screws!

<< < (2/2)

Laverda Dave:
I'm with Ted, go for stainless. I used Westfield Fasteners for mine, nice and easy website to navigate.
I file the script off the tops of the hex head, followed by emery cloth and then onto the polishing mop with some suitable soap. They come up like chrome. Same applies to screw heads etc.

SeanFD:
Use Allen screws. Much easier to get out - and more importantly back in as they sit on the hex key.

McCabe-Thiele (Ted):
I like Hex on side covers but not for top crankcase screws as they hold water & dirt.  Also be cautious on smaller threads sizes like M5 as it's easy to overtighten them in some areas  stripping the thread

Laverdaroo:
Don’t use hex key ones, Ted is spot on


Sent from my iPhone using Tapatalk

Navigation

[0] Message Index

[*] Previous page