SOHC.co.uk Forums > CB750

Cb750k timing marks

(1/2) > >>

Pauarc:
When timing is set to f mark and then open throttle it’s not reaching fully advance
Mark any ideas on this
This was Set with strobe light

Bryanj:
The F mark is for static timing with a bulb not for use with a strobe

Pauarc:
So is it best to set at fully advanced with the strobe

Bryanj:
There should be a way of setting the timing static and if the instructions of your electronic dont give that imo they aint worth it.
As the advancers get older the springs get weak and advance starts earlier.
If you have no way of setting static timing i would put the full advance half way between the two marks for advance.

I really hate these manufacturers who dont give full and proper fitting/running instructions

McCabe-Thiele (Ted):
My Dyna S came with full instructions  plus there are some helpful videos on U-Tube.
IIRC my instruction included static timing to get it running, I then used the strobe for dynamic timing on the 400.
Mine was fidly to get it right on 1/4 then on 2/3 as the screws were running out of adjustment so had to re-do 1/4 with the main base plate moved a tad then re-itime 1/4 again etc.

Ignore the daft intro.

. https://www.youtube.com/watch?v=uAAin68t270

Navigation

[0] Message Index

[#] Next page