SOHC.co.uk Forums > CB750

Fuel restriction.

<< < (2/3) > >>

McCabe-Thiele (Ted):
Some of the fuel hoses seem very soft walled and go even softer in use.
I have used this on my 500 as it was fitted by Gerben or PO it's reinforced as well so does not flatten easily.

.https://www.ebay.co.uk/itm/334357613189

Pauarc:
On the k2 it has 2 holes for the fuel pipe as 2 goes through housing

Johnny4428:
Thanks guys for input. My 550k3 has the same problem outlet coming down towards inlet rubber. I’ll check carb bank for possible alternative routing and seek some stronger walled fuel hose.

Johnny4428:
Trimmed back the kinked hose and tried this for fun.

McCabe-Thiele (Ted):
Your new routing looks much better - presumably that is a 400 type spring/heat shield.

I like a clip on the petrol pipe for peace of mind on my 500 - very tricky putting a spring clip on my 500 as there isn't much space at the carb ends. Mine has the twin pipes.

Navigation

[0] Message Index

[#] Next page

[*] Previous page