SOHC.co.uk Forums > CB750

K4 (US model) Fuses

(1/2) > >>

ColinHH:
I was working in the headlamp and accidentally fused the headlamp fuse. However in the fusebox it had blown the 5amp fuse which was correctly fitted where the 5amp is indicated on the box. The 7amp fuse isn’t blown. But neither the headlight or the tail light works and are therefore both being fed via the one 5amp fuse, which does’t seem correct. My understanding is that the 7 amp fuse is for the headlight and the 5amp one is for the tail light? If i just replace the 5amp fuse and leave the 7amp clips empty the headlight and tail light both work. Am I missing something or is there a problem?

Bryanj:
I though it was 15, 7 and 5

ColinHH:
Sorry, maybe I didn’t make myself clear. There are 3 fuses. 15A, 7A and 5A. The fuse that blew was the 5A which meant my headlight and tail light doesn’t work. I though the 7A was for the headlight and the 5A for tail light. But the headlight won’t work unless I put the 5A fuse in.

Bryanj:
Then its wired wrong in the headlamp somewhere, does this have a lights on/off on the RH switch or not

ColinHH:
Yes, it has the lights on/off on the right hand handlebar switch.

Navigation

[0] Message Index

[#] Next page