SOHC.co.uk Forums > CB750
Wiring harness connection to battery tray (with pics)
Mike_Berkshire:
No side stand switch on mine and no red connector block either - all connector blocks are white. I guess the PO replaced the red connector block with a stock white one for some reason. There is a 5 way connector with wires going to the heat sink thing that is mounted above the starter solenoid.
Yuppie_88 (Luke):
Yep, on mine (750 K4) there is no side stand switch either.
The safety unit is unfortunately discontinued - I spoke to David Silver today to confirm. This means I'll be jumping the safety unit connection as BigAl mentioned.
I've found a nice electrical box online which has 60mm centre mounts, this should bolt on directly to the original safety unit mount (could be a nice place to keep some spare fuses too). I intend to run the jumper connection through the box to keep things tidy and add a nice new connector block on the end of it. I know I'm the only one who will probably see this but, I don't like the idea of this thing flapping around ;D
McCabe-Thiele (Ted):
This thread ought to be on the 500/550 section.
My 500 K1 has no red block connectors, no stand or clutch switch.
Mike_Berkshire:
Good point Ted. See new post on 500/550:
McCabe-Thiele (Ted):
I thought the site moderator could just move the whole caboodle.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version