Other Stuff > Misc / Open

Hondabond etc

(1/2) > >>

AndyD:
Hi,
Looking to get a fresh tube of crankcase sealant and wondered if anyone had views on best stuff.
Have used Threebond 1215 previously and works well, and is also grey which works well with unpainted engines.
Seen a lot of Hondabond HT too which is black but presumably for higher temperatures as name suggests?
Any views welcome before Googleshop and order something up.
Cheers,
Andy

McCabe-Thiele (Ted):
I used the grey Honda bond, I  taped around the cap using the same tube again just over a year later.

Athame57:
If you get genuine Honda gaskets you won't need to risk messing about with sticky stuff, they go in dry.  ;)

Nurse Julie:
It's for the crank case halves George, no gasket fitted there.

Jan B:
Loctite 5699

A thin smear will do the trick nicely. Avoid applying too much. Excess can end up in the oil galleries and cause oil starvation.

Navigation

[0] Message Index

[#] Next page