SOHC.co.uk Forums > CB500/550

CB550 refurb

<< < (46/52) > >>

Johnny4428:
I fitted this DS master cylinder kit a little more than a year ago. But it has failed big time. Not just a weep but a pool on the floor in the morning. Not even riding the bike! I would say the rubber is a touch hard and don’t like the fact that you can insert the plunger with little or no resistance. Bore in the cylinder looks fairly descent, so the question is where can I get a reliable kit from?



Sent from my iPad using Tapatalk

Bryanj:
Buy the ropo master cylinder instead

Bryanj:
If its laid out as it was assembled it was done wrong, the loose lip seal shoul be aginst the piston and the hard cup at the very end

Johnny4428:
It was assembled the correct way Bryan, doubt if would have worked the way it’s laid out there, it was just a pic of the removed parts. I ran the bike last summer with no issues and not a drop of fluid leaking, because I had renewed the seals and internals in the cylinder. The master cylinder looks to be in good condition for age, had it been otherwise I would have replaced it.

Johnny4428:
Master cylinder assembly complete, cheaper than an OEM master cylinder kit!😳 maybe a no brainer.

Navigation

[0] Message Index

[#] Next page

[*] Previous page