SOHC.co.uk Forums > CB500/550

Using the original Honda style 500 grease nipples?

<< < (2/3) > >>

SteveW:
I bought M6 threaded nipples, so drilled and tapped to M6.
Worked perfectly.

Bryanj:
I just buy M6 grease nipples then drill and tap M6x1 mate. Which is the most common M6.

McCabe-Thiele (Ted):
Pretty sure I have an M6 tap so need what diameter drill bit will I need?

Bryanj:
5mm or 13/64 Ted

McCabe-Thiele (Ted):
Thanks Bryan that will be plan B.

Navigation

[0] Message Index

[#] Next page

[*] Previous page