SOHC.co.uk Forums > CB350/400

Bullet connectors?

<< < (2/2)

ST1100:

--- Quote from: Deano400 on August 31, 2024, 05:22:50 PM ---Link to Kojacat that Ted is referring to.

https://kojaycat.co.uk/epages/950000457.sf/en_GB/?ObjectPath=/Shops/950000457/Categories/Connectors_Bullet/3.5mm_Japanese_Bullet_Connectors

--- End quote ---
How is the material quality of those?
Got some bullet connectors (single and twin) here that seem made of rather thin brass sheets, hence don't latch very strong and can be pulled apart rather easy (especially compared to the OEM Honda ones...)

BigAl (Alan):
I much prefer the bullet connectors from Vehicle Wiring Products... 3.9mm as top image. Solid material with a none shiny finish...gives a very secure fitting to the sockets.
The 'tinny' type bullets...3.5mm as lower image are slightly shorter and provide less crimping space for the wire/insulation termination.

McCabe-Thiele (Ted):
FWIW when I fitted new connectors I used solder after crimping them.
I found using 3.9 connectors do not fit as they should if the switches or whatever are 3.5 m so I used 3.5 mm to match.
Yes you can switch them over if you want so they are all 3.9mm connectors.

Navigation

[0] Message Index

[*] Previous page