SOHC.co.uk Forums > CB500/550

Upper brake hose length

<< < (2/3) > >>

TezzerTel:
Have you found a easily found replacement?

I'm looking for one myself

SteveW:
Wemoto, part number AH8566 is for the two rubber hoses and the rigid pipe at the bottom.

I emailed them asking them for the length and they came back with 37cm and 40cm for the rubber hoses.
So they are for UK handlebars.

TezzerTel:
That part number is coming back as a exhaust stud?

McCabe-Thiele (Ted):

--- Quote from: SteveW on September 11, 2024, 02:12:20 PM ---Wemoto, part number AH8566 is for the two rubber hoses and the rigid pipe at the bottom.

I emailed them asking them for the length and they came back with 37cm and 40cm for the rubber hoses.
So they are for UK handlebars.

--- End quote ---

My measurements at 14" is about 35.6 mm not quite enough it seems  it's actually 37 cm so I was 1.4 cm short, sorry about that.

SteveW:

--- Quote from: McCabe-Thiele (Ted) on September 12, 2024, 12:27:15 AM ---
--- Quote from: SteveW on September 11, 2024, 02:12:20 PM ---Wemoto, part number AH8566 is for the two rubber hoses and the rigid pipe at the bottom.

I emailed them asking them for the length and they came back with 37cm and 40cm for the rubber hoses.
So they are for UK handlebars.

--- End quote ---

My measurements at 14" is about 35.6 mm not quite enough it seems  it's actually 37 cm so I was 1.4 cm short, sorry about that.

--- End quote ---
Don’t be, your measurements were perfect for me, I just wanted to be sure that I didn’t end up with the US length hoses. The upper US hose is another 10 cm longer, I’ve been using UK bars with a US top hose for the last couple of years. So I have this great loop of hose by the front lever that looks odd.

Navigation

[0] Message Index

[#] Next page

[*] Previous page