Other Stuff > Misc / Open

Keihin 022a carburettor choke lever

<< < (2/2)

SteveW:
I found the spring with a magnet sweep.

I work with superconducting electromagnets every day, trouble is they weigh around 5 tons and are insanely strong.
Wouldn’t be a good idea to use one, everything metal would be stuck to it and wouldn’t come off.

McCabe-Thiele (Ted):

--- Quote from: SteveW on September 03, 2024, 08:06:33 PM ---Thanks Ted, my ball bearing is somewhere on my garage floor I think.

--- End quote ---

I "lost" a clip from my 500 gearshift fork - did the sweeping of the garage floor thing with brush then magnet on the sweepings, no luck until about two months later I spotted it by chance about six feet away from where it "escaped" during removal.

Johnny4428:
I hate when that happens, there’s so many nooks and crannies in an average w/shop that something can find its way into. Although south of the border do you have “nooks and crannies”?😜

neat street:
you can use a sock over the end of a vaccum cleaner hose, the sock works as a sieve to stop the parts going where they shouldnt, also good for non metalic parts..

Green1:
That wouldn't work with my socks

Navigation

[0] Message Index

[*] Previous page