SOHC.co.uk Forums > CB500/550

Delkevic exhaust problems

<< < (2/2)

mickwinf:
Thanks for replies, I have no 2 pipe outside the sidestand so that may be the problem.

McCabe-Thiele (Ted):

--- Quote from: mickwinf on September 22, 2024, 04:28:41 PM ---Thanks for replies, I have no 2 pipe outside the sidestand so that may be the problem.

--- End quote ---

You definitely need number two  pipe to the right of the stand lug on the frame mine runs very close probably only 15-20 thou of an inch away - the gap might close slightly when you tighten up the front clamp. I found if the clearance gap was too wide then the rear view of the silencers would show the exhaust as not parallel at the ends so they did not sit right in respect to one another.

mickwinf:
Just had a quick look and putting no 2 pipe inside the sidestand seems to be the answer, rookie error! Thanks all will try again when time permits but think it will be ok.

Navigation

[0] Message Index

[*] Previous page